You can do Scottsdale handyman in your house on your own without having to hire an expert. However, you should learn a few techniques that experts use.
The following is a simple guide that will help you get good results, and at the same time, spend less.
Prepare the Wall
You must have a blueprint for the installation. Get measurements for the cabinets, setting the right height for the cabinet base. After that, mark the height of the top cabinets. On your blueprints, make sure you label the cabinets accordingly. When you have all the measurements, identify the location of the stud.
Cabinet Drawers and Doors
During handyman Scottsdale AZ, you should remove the drawers, doors, and shelves. This will reduce the risk of damage and will also make your work easier. Make sure you mark their positions accordingly. In most cases, the upper cabinets might not have an elaborate bottom or top. Therefore, depending on how you want their doors swinging, you can hang them in either direction.
It’s possible to shim the cabinets step by step during handyman Scottsdale. However, in the case of a significant bow, it’s wise to shim it before the cabinet is set in place. This will also help you avoid pulling the cabinet back as you try to fasten it to the wall.
It’s always safe to start with the top cabinets, especially if they are not so high up above the base cabinets. While at it, you want to make sure you no longer have to hold them and at the same time screw them to the wall.
Fastening the Cabinets
If your cabinets face one another, have the face frames in line and then use a clamp to hold them together. Make sure that they are fastened to the wall, or loosen one until they are all in place, and then fasten them. If you have to use a screw head, make sure you do this in a way that is not easily noticeable.
Choice of Screws
For this project, make sure you have the best screws. You are spending so much money on quality materials for your cabinets, so it’s only fair you get the best quality screws too. R4 counter sinking screws from GRK are some of the best when you need fasteners. Avoid drywall screws by all means.
Before you start leveling, make sure the bases of the cabinets are lined up properly. Ensure their backs are also at the same level, and then you can use shims to fasten them in place. Be very careful when you are doing this so that you do not have to worry about items rolling or sliding off your countertops.
Securing the Cabinets
In case your cabinet design is a peninsula or you have island cabinets, these have to be fastened to the floor for security. For island cabinets, you simply need to join them together. Find the outline and trace it to the floor, then secure them. For good results, 2×2 screws are ideal. You might need to have flooring blocks under the screws where necessary.