How to Convert a Dining Room to a Reading region

What could be more comforting than to curl up in a cozy chair with a good book or magazine that has just been dropped into your mailbox? But locating space to your reading area takes some idea. A dining room might just be an extra room if your living style doesn’t involve large families or entertaining. Developing a reading area from this square footage is a superb way to personalize your lifestyle and to turn your home into what works best for you personally.

Plan Ahead

Whether you’re converting another dining room, a dining area or a little space adjacent to a kitchen into a reading area, fulfilling your wish for a cozy, private sanctuary is not a difficult task. Know what you want to add inside the room, and plan ahead, utilizing furniture you might already have and scouting for extra bits in nearby thrift stores.

Dining Room Conversion

In case you have the luxury of another dining room but it’s wasted on a dining table you do not need, turn it into a reading area by moving comfortable furniture into the space. Pick a cozy reading chair, perhaps one that reclines in case your eyelids droop, and place a floor lamp nearby. Add a side table and magazine rack near the chair for convenience. Use the extra space for a little sofa and cocktail table in which novels and books can be exhibited, and place an area rug between the chair and sofa. Line the walls with bookcases, and include a writing table to finish your reading room.

Open Dining Area

Adjacent to your own kitchen and behind the countertop barstools might be an extra dining area that is superfluous to your demands. Even though it’s accessible to the kitchen, then you can make a cozy reading area with the appropriate furnishings and accessories. A comfortable chair with either tabletop or floor lighting, an ottoman and a side table is all you will need to accomplish your objectives. Wall space is perfect for a little bookcase, along with the floor, covered with a casual area rug, specifies your reading area.

Kitchen Reading Nook

A counter runs the length of the kitchen workspace and is lined with barstools. A dining area is nearby, or a dining room is round the corner. Continuing the length of this kitchen is just another eating area. Not all of them are necessary. Turn the kitchen area that’s designed for a casual dining table into a perfect reading area. Put two reading chairs in the corners, turned inward toward the middle. Put a little table between them using a reading lamp, and cover the floor space between the seats with a room rug. Reclining seats or chairs with ottomans work best. Utilize wall hangings and artwork that are more in tune with reading and solitude instead of being kitchen-oriented, and your reading area becomes a distance unto its own.

See related

Tenant's Rights When a Landlord Violates Residential Lease Laws

California law provides residential renters basic legal rights regardless of the terms of a lease agreement or the invoices of a landlord. Based on the situation, you are able to address a suspected violation of the rights as a tenant in several ways. You can file a complaint with a government agency, take your landlord to court or, in certain circumstances, use self-help remedies such as abandoning the lease unit.

Report to a Government Agency

Various government agencies oversee the activities of landlords and act on complaints to ensure that tenant rights aren’t violated. For example, on the state level, the California Department of Fair Employment and Housing is investigates and litigates housing discrimination complaints, including those associated with a prospective tenant’s effort to lease a residential unit. Local agencies are usually responsible for health related problems, such as pest management and habitability issues. If your landlord does not properly address such difficulties, it is possible to report your landlord to the local health agency. The agency will inspect the property and, if appropriate, issue a notice of violation with directions to the landlord to remedy the situation.

Repair and Deduct

If your rental unit sustains damages that affect its habitability, you are eligible to fix the hurt yourself and deduct the expense of repair from the rent under certain circumstances. The “repair-and-deduct” remedy is only accessible after you first notify your landlord of these required repairs and give the landlord a reasonable time to make the repairs. Under California law, 30 days is presumed to be a reasonable time. You can use the repair-and-deduct remedy if the landlord fails to make the repairs. This remedy has added limitations: the repairs cannot be more expensive than one month’s rent and you cannot use the remedy over twice in a 12-month interval.

Abandon the Rental Unit

As an alternative to the repair-and-deduct remedy, it is possible to abandon the lease unit. This remedy is usually used when the cost of repairing the settlement is greater than one month’s rent. You must also give the landlord notice and a reasonable time to fix the harm as you have to with the repair-and-deduct remedy. When this remedy is used properly, you are no longer responsible for paying rent after the unit is vacated. The vital point is the harm to the unit must leave it unfit for habitation.

Civil Lawsuit

You have the right to take your landlord to court any time that your rights as a tenant have been violated. This includes suing your landlord though you still occupy the rental unit. For example, if the landlord failed to create needed roof repairs and your own personal possessions sustained water damage during a rain storm, you can sue your landlord for the damage to your house whilst still renting your unit. Also, you can sue your landlord after vacating the unit, which usually takes place when the landlord wrongfully withholds a few or all of your security deposit.

See related

How to Find a Real Estate Lien Holder

A lien is a claim against a property. If you’re interested in a specific home, it is important to uncover any hidden liens. Real estate liens attach to the property, not the debtor. When ownership changes hands, then the lien remains on the home. Mortgage businesses require a clean title before a loan is issued. If you’re purchasing the home outright or purchasing a foreclosure at an auction, check for property rebate yourself prior to signing a contract. California county recorders keep a searchable property database that provides lien holder information.

Obtain property details in the county tax assessor. Tax records are public record. It is possible to view the owner’s name, description of the land, lot and assessor’s identification number.

Go to the county recorder’s office. Some counties offer information on the web, but in most cases you’ll need to search the registry of deeds in person. With the particular property information, you can see legal documents regarding the ownership, for example, mortgage holder and judgment liens filed by creditors.

Piece together the info. Each previous sale, transfer, mortgage, mortgage, mortgage release, and lien make up the property’s “title”. The records are not all grouped together, but rather filed by date of occurrence.

Pay to get a title report. If you don’t need to search yourself, you can employ a title company, attorney, or escrow company to retrieve the info. The title report comprises the names of titleholders and the way title is held, tax rate, property taxes due, and encumbrances, like mortgages, liens, deeds of trusts, recorded judgments.

See related

The way to Arrange Two Recliners in a Little Den Using a Corner Fireplace

A striking den structure entails flanking a corner fireplace with two recliners, then positioning other furniture toward the end of the room. When placed at an angle, then the recliners restate the corner fireplace contour. But arranging the recliners elsewhere in the room types an asymmetrical arrangement that may direct focus on desired decor.

Flanking the Fireplace

Enhance a corner fireplace by positioning recliners on either side and in front of the fireplace. By turning the recliners inward to handle the fireplace, you direct focus on the fireplace itself, a framework or a mirror on the fireplace mantel, that establishes a clear focus to your room. At the end of the room, a little sofa adds interest, as does a console behind the sofa, assuming you have the space. You can also arrange the couch opposite the fireplace, the recliners angled in from each side and a coffee table between them to create a conversational area in front of the corner fireplace.

Angling the Recliners

By putting two recliners toward the middle of a little room, then angling the recliners to confront each other, you establish a V-shape which echoes the corner fireplace form. End tables beside each recliner supply definition. And between the recliners and the fireplace, two ottomans supply color without the addition of more large furniture in a small room. When angled recliners are placed at the end of the room, more space can be found in front of the recliners, allowing room for a little, adjacent settee.

Recliners on a Horizontal Wall

If recliners are placed on a wall wall, the corner fireplace gets less prominent, as the recliners draw focus to their visual weight alone, and the horizontal arrangement provides a chance to include a thin, but long coffee table. A rectangular carpet is one way to direct attention toward the corner fireplace. To avoid crowding the room’s perimeter, a little loveseat or futon at the end of the room completes the geometric arrangement without adding more weight to one side of the room.

Dispersing the Recliners

A alternative to clustering the recliners in a set involves spreading them to open space when making an asymmetrical look. By putting one recliner with a corner fireplace, space is cleared for a little settee or a futon near the end of the room. Turned inward to confront the horizontal wall, the other recliner adds an additional bench to the furniture crowd. An ottoman adds balance, especially in the event the ottoman fits the color of the recliner near the fireplace.

See related

How do I Paint Checkerboard Walls at a Teenage Boy's Bedroom?

Give a teen boy’s bedroom walls a checkerboard finish to transform the space from boring to bold. Go for a classic black-and-white checkered finish on one wall for a look inspired by a racing flag, or even pick two of his favorite shades that pair well together for a personalized interpretation. If the contrast between colours makes a daring statement, limit the look to one wall within view at a time to prevent visual overload.

Preparing the Space

Move all of the furniture away from the walls being dust and painted the walls entirely from top to bottom; otherwise, debris may stick in the primer or paint. Protect the edge of the ceiling, as well as the baseboards, with painter’s tape; then cover the ground in front of the wall using a hammer. If the present paint finish is shiny, scuff it gently with sandpaper, then wipe away the dust away. This ensures better paint coverage with all the new finish.

By Base Coat to Checkerboard Basics

Paint the walls with the lightest of the two checkerboard colours. If using two of the exact same shade — one apartment, one in a higher gloss — utilize the apartment paint as the base coat. Apply a second coat if the original wall colour shows through as soon as the first coat dries. Once the base coat is completely dry, measure the wall’s width and length; then decide upon a square size for the checkerboard pattern. Depending upon the square size and wall’s dimensions, some wall edges may end up with partial squares, therefore plot the design on graph paper to ascertain the perfect visual design, based upon your vision to the space. Plot the initial square for the center of the wall if you want partial squares at the two ends, or start at the same end of the room if the belief needs to have a full square along that edge.

Plotting the Pattern

Plot from the checkerboard’s lines from starting at the top left corner of the room, measuring the desirable magnitude of one square, then earning a pencil mark. Repeat the process all of the way across along the top edge of the wall, then again at the bottom, starting in the bottom left corner. Combine the pen lines employing a massive straightedge, or shine a laser level on the wall to skip the massive pencil lines. Put strips of tape across the pencil or laser line so the tape marks the exterior lines of the initial and all odd-numbered columns. The tape sits within the even-numbered columns, therefore the sizes will look off. Plot the flat lines in the exact same style, using pencil marks or a laser amount before taping, again positioning the tape so it rests outside the lines on all the odd-numbered boxes, inside the lines on each of the boxes. Draw a little “X” in pencil in each box, then marking it to be painted using the second shade. The marks show up in the full-sized or odd-numbered boxes.

Coloring the Checkerboard

Paint all the marked boxes with a small roller or a brush. Once the paint is dry, remove the tape from the unpainted areas that look like smaller squares due to the tape positioning. Re-tape the lines as required, covering part of the newly dried paint, to fill in the remaining squares using paint. Mark the locations that still require paint using “X” marks, even though it could be evident without them. Paint the squares demanding paint, and get rid of the tape after all of the paint is dry to the touch.

Vivid Variations

Instead of black and white or one color against another for the checkerboard, create your own variation with synthetic finishes or one sheen played against another. For instance, create a colour wash or artificial marble effect in a few of the squares, or even a brushed stainless steel effect using metallic paint played against a soft gray. To get a sheen-on-sheen look, use the exact same shade for the two paint, but various sheens: one flat, 1 semi-gloss.

See related

The finest Waterford Stemware Patterns

Waterford is synonymous with the highest-quality Irish crystal accessible. Waterford chandeliers hang in areas of prestige like Windsor Castle, Westminster Abbey and the Kennedy Center in Washington, D.C. And who hasn’t seen the crystal ball falling in Times Square at midnight on New Year’s Eve? That, also, is Waterford. Waterford stemware is a coveted addition in wedding registries, while marrieds and non-marrieds alike relish drinking their wine in an elegant Waterford glass. Favorite patterns have emerged through the years, all reflective of this hand-cut craftsmanship that has defined Waterford for decades.


Waterford’s most popular cut-crystal pattern, Lismore, was produced by the company’s designer Miroslav Havel in 1952. It was motivated by the spectacular Lismore Castle in Waterford County, Ireland, a magnificently turreted structure with complex leaded windows. The castle once belonged to Sir Walter Raleigh. Lismore crystal has a gorgeous simplicity, with smooth wedge cuts supporting the open, elongated ovals. A finger run over the wedges finds no sharp edges, but rather glides gently over the crystal-cut pillows.


The Alana suite of cut crystal was released by Waterford in 1952 and has been the first in a set of layouts named after Irish women. Meaning “darling” in Gaelic, Alana features a deep area of wedge cuts encircling the bowl of each piece. Lavish in its numerous rows of cuts, Alana is beloved by collectors who respect plenty of crystal cutting.


As popular a Irish name since it is a style of Waterford crystal, this layout was released in 1968. Lovely and stylish without being overly ornamental, the Colleen design is famous for its elongated “olives” that occupy almost half of the very surface of each piece. In the base of these olives sits a area of diamond cuts duplicated in the Alana pattern. A crystal bubble decorates the stem of Colleen glassware and features circles of nice wedge cuts.


The archived Powerscourt pattern was inspired by the gardens of the identical name in County Wicklow, Ireland. Paying tribute to Asian flora prominent at Powerscourt, this layout includes leaves using flowery representations covering almost the entire surface of each piece. A foundation of interconnected diamond patterns provides the visual strength of the plan. First introduced in 1969, Powerscourt appeals to this naturalist in crystal collectors and is still available by custom order.

The Millennium Series

Among the newer suites released by Waterford is the Millennium series, which rose in popularity in the turn of the 21st century. Denoting a multiple depiction of happiness, love, health, prosperity and peace, the champagne flutes are lavishly embellished in cut-crystal sheaves of wheat. A frequent choice of millennials who are beginning their collections, this line of Waterford crystal entered the new century in style.

See related