Category: Fireplaces

Yellow jackets (Dolichovespula spp., Vespula spp.) , black wasps with jagged yellow markers, are considered beneficial because they feed on large numbers of pest infestation. Nevertheless, many people view yellow jackets as pests themselves, because they can deliver wicked stings when hardened. Although yellow jackets typically prefer nesting in quiet, out-of-the-way places, some colonies develop in areas that experience a lot of human action. Those nests will need to be eradicated to avoid painful and potentially dangerous stings. The ideal chemical for the job depends on whether you’re dealing with a curved aerial nest or a single unseen beneath the ground.

Aerial Nests

A few yellow jacket queens build exposed nests that hang out in the open from tree limbs, shrub branches or roof eaves. The University of Idaho Extension recommends treating aerial nests using a pyrethroid-based insecticide. Pyrethroids quickly kill yellow jackets but only have reduced toxicity for people, birds and pets. The common names of pyrethroids always end in “-ate” or “-thrin,” like “cypermethrin” or “lambda cyhalothrin,” both widely used to eliminate the stinging pests. To treat the nest from a safe distance, then pick a pyrethroid product that comes at a ready-to-use aerosol format using a jet propelled trigger that sprays a stream of insecticide at least 20 feet away. Take the pesticide right into the entrance, typically located at the bottom of the nest, and then completely soak the outside of the nest as well. Wait at least 24 hours before returning to the treatment site in order to check for yellow jacket activity. Repeat the spray treatment every 3 days until you no more spot live yellow jackets in the nest area.

Subterranean Nests

Ground-dwelling yellow jackets are somewhat more challenging to control than people residing in aerial nests because they are often located in hard-to-find abandoned rodent burrows and other cavities that are protected. Carbaryl-based dust pesticides effectively control subterranean yellow jacket populations, but you have to get the dust inside the nest in order for it to work. As soon as you find the nest entrance, wait until dusk, and until you do not see yellow coat action, to sprinkle carbaryl dust around the entrance hole. Then use a hand duster or a moist liquid detergent bottle half filled with the insecticide product to get several puffs of their dust inside the opening. Instantly leave the treatment area, and don’t return for at least 24 hours. Duplicate the dusting process about every 3 days for as long as you visit yellow coat activity at the nest area. Once you successfully remove the stinging insects, seal the entrance hole with soil treated with carbaryl dust or a pyrethroid-based aerosol insecticide. This should maintain any surviving yellow jackets from reestablishing a colony.

Timing Chemical Treatments

Mid- to late spring is the ideal time to chemically treat a yellow jacket nest because the queen has started establishing her perverse but its numbers are still quite small. If you find a curved airborne nest earlier in the season, only knock it down with a powerful blast of water from a garden hose. Apply chemical therapies in dusk or after dark when cold night temperatures arrive and the majority of the foragers are calmly resting from the nest. Yellow jackets are sluggish and also have trouble flying as soon as the temperature falls below 50 degrees Fahrenheit.

Personal Safety

Yellow jackets attack as soon as they sense their nest being threatened by poison. Protect yourself from both stings and compound exposure by wearing heavy clothes, goggles, thick work gloves, socks and shoes, a hat, and a face mask or bee veil. Wear a long-sleeved shirt and pants, taping the cloth around your ankles and wrists to keep the agitated insects from getting beneath your clothes. Light may startle yellow jackets into aggressiveness, so avoid shining a light source straight at a nest opening. If you have to use a torch, cover it with red cellophane because the insects can’t see red light. Never, ever try to deal with a nest if you’re allergic to yellow jacket venom. Enlist the assistance of a non-allergic individual or a professional exterminator rather.

See related

Few insects or diseases cause white spots on fig trees (Ficus carica). Fig trees grow in the warm areas of U.S. Department of Agriculture plant hardiness zones 8 through 10 and can be invasive in some places. Scale insects and mosaic virus can cause pale yellow, almost white spots to form on leaves. Pale leaf spots are fatal and therapy might not be vital.

Scale Insects

Young scale bugs are light in color and feed on the foliage, which can cause discoloration and light-colored spotting. Scales, which feed on branches and twigs, develop a coating and a dark brown color. Scales don’t move once they mature, so they don’t always resemble insects. Look for the presence of young and both scales if they are the reason for the spotting to determine. Because scale insects controlled are usually kept by predators, you do have to see to your fig tree. Employ a horticultural oil throughout the season, if scale insects persist and thoroughly saturate the trees foliage, including the bottom of leaves. Don’t apply the oil if temperatures are above 90 degrees Fahrenheit, rain is expected or states are foggy. Wait 30 days if another type of fungicide was applied before spraying on the tree with foliage damage or oil can happen. After applying, wear a shirt, jeans, socks, socks, eye protection or a gloves. Keep pets and people out of this area until the spray has dried.

Mosaic Virus Symptoms

Pale is the symptom of mosaic virus. The spots range from light yellow to bright yellow, with the paler spots appearing nearly white. The rest of the foliage around the stains remains a vibrant green, providing a clear contrast. Mosaic also spreads into the fig fruits. Mosaic virus isn’t fatal, but it can diminish your fig harvest. The the fig mite spreads mosaic virus.

Fig Mite Problems

Therefore the tree stays effective, fig mites can decrease the spread of mosaic virus. The mites are exceptionally small and light yellow. They mostly feed on leaves and buds, which can give rise to portion or a russetting of the foliage in which they are most active. Mites attack fig trees roughly one month after the new leaves unfurl in spring. Inspecting the leaves with a magnifying glass every day in this period allows you to catch mite problems before they have a chance to infect the tree with virus.

Mosaic Virus Remedies

When it is infected with virus, There’s no cure or treatment for a fig tree. The disease isn’t fatal if you don’t need to disperse mosaic virus into some other 28, but it’s ideal to ruin the tree. The fleas are killed by Implementing a sulfur spray in the first signs of a mite disease and can keep them. Dissolve 3 teaspoons of lime sulfur in 1 gallon of water, and place it into a sprayer. Spray the foliage of this fig, coating it evenly on the bottom and upper surfaces of the leaves. Put on the sulfur, if you find fleas following 15 days. After applying, wear a shirt, jeans, socks, socks, eye protection or a gloves. Keep pets and people out of this place until the spray has dried.

See related

If you are decorating a room for a princess or adding love in the master bedroom, a canopy creates a timeless appearance on any bed. You can receive this look even in the event that you don’t possess a canopy or four-poster framework on your bed. Sheer canopies may be hung from the ceiling, using different procedures, depending on the type of canopy. Even regular curtain panels may shroud your bed in puzzle if them hang from ceiling curtain poles.

Four-Poster Frames WCross Bars

Install two on each side crossbar the lace waterfall valances and two on the crossbar.

Jump to Steps 2 and 3 in the event that you have absolute canopy panels. By draping it on the framework of the bed over the four corner post finials, install the four-poster canopy. Use the lace ribbon to tie the canopy at each corner post. Jump to Step 4.

Drape one canopy panel that is complete over every crossbar at the bed’s head. Permit the fabric to dip slightly in the middle, ensuring that you have an equal amount of fabric on all sides of the bed.

Drape the absolute canopy panel over every crossbar at the foot of the bed, adjusting it in precisely the same fashion as the primary panel.

Gather each panel at level that is mattress and connect a lace ribbon to hold it or allow the panel if desired to hang naturally.

Scatter lace assorted shapes and sizes and accent cushions in colors that are complementary at the bed’s head. An elegant lace throw over the foot of the bed.

Ceiling Installation With Hooks

Hold the front corner loop of the canopy over the front corner of the bed whilst standing on a step ladder and have a spouse do the same on the other side of the bed, standing on the bed or a seat to help determine the positioning of the ceiling hooks. Mark the ceiling lightly with a pencil.

Drill a pilot hole. Insert the hook and toggle through the hole, then screwing the hook far enough in before the wings open. Continue is flush with the ceiling.

Drill a pilot hole for the front ceiling hook and install the hook. Put the ribbon loops. The procedure for the bottom hooks at the foot of the bed.

Use the lace ribbon to tie the corner canopy drapes as if were a post , providing the identical appearance as though the canopy were set up on a four-poster framework.

Repeat Step 4 in the four-poster setup.

See related

Lodge-style homes or cabins provide an escape from existence in urban centers. Stunning wilderness areas are within driving distance from California cities like San Francisco. Rustic retreats can seem true but still be comfortable. When the economy is strong, homeowners may consider buying a cottage or lodge for vacations and family retreats. Decorating the house to allow it to be inviting and warm helps ensure its value in the event it ever goes back on the market.

History

Cabins and lodges are traditionally wood-frame structures that may have electricity, running water and insulating material –or none of these features. Old hunting lodges built in the foothills of Southern California in the 1890s until the 1920s served as weekend getaways for businessmen and film celebrities. Some cabins survive now –transformed into permanent residences and surrounded by encroaching urbanization. Fishing or hunting lodges, once distinctive retreats for wealthy financiers, today cater to tourists and weekend adventurers.

Function

Cabins and lodges provide comfortable living spaces that help people unwind and revel in their stay. Cabins protect people from the components –heavy rain can spoil camping trips. Having a cozy place to rest after a strenuous day spent hiking or kayaking is important. Some rustic cabins are for spring, summer and fall use only. Insulated ski lodge-type dwellings provide year-round accessibility.

Materials

Organic materials like wood and stone work well in cabins and lodge homes. Choosing the type of wood or rock commonly found in the vicinity helps tie a house into the site. Materials often used in cabins include rough-hewn logs fashioned into furniture, and birch bark and branches used for signs and decorations. Pinecones are plentiful in pine forest settings and look proper piled in baskets or lined up on mantelpieces.

Characteristics

Small cabins might just have a living space, one separate sleeping area and a bath. More luxurious dwellings sometimes feature natural-stone bedrooms along with a number of bedrooms. Kitchens opening up onto a living area make spaces seem more open. Some cabins feature post and beam construction, which allows for an open-concept design–walls aren’t structural and can be transferred. Sturdy cloths and functional objects make the space comfortable without looking overdesigned. Topographic maps placed in pine frames allow vacationers plan drops out of the comfort of the living room. Materials like cotton or wool duck in solids, plaids or patterns, including plants or animals, work well on drapes and sofas. Straightforward table or floor lamps fashioned from dark iron are all suitable in cabins and lodge-style decor. Mellowing electric light bulbs by adding mica colors creates a space cozier at night. Lodge blankets featuring Native American Western or designs themes decorate sofas and seats and help ward off chills on winter evenings. Rustic wall decorations, including reproductions of old lodge signs and travel memorabilia appear on many different retail websites.

Misconceptions

Renting a cottage or lodge home does not need to be done at one time. Cabins are as much about building memories as about design brand new furnishings. A household can enjoy vacations on mismatched sofas and chairs as easily as on a perfectly matched pair. Comfort is important however, as is functionality. Vintage stoves add diverse appeal to rustic kitchens–as long as they work well. Secondhand iron beds or cots fit in visually, but check out the springs to be certain they are not worn out.

See related

Familiarity comforts us. It is no surprise that when we choose a house, we often look for the comfortable or a institution from the context of our families. This may be one reason that Georgian-style houses are still common and popular, especially in the eastern U.S.. They’ve a long and productive history.

Georgian architecture began in England as the result of the Renaissance’s reaching the British islands in the middle of the 16th century, following its development from Italy and series in France. The Georgian interpretation of classical architecture flourished in England from the late 17th and early 18th centuries, coinciding with the establishment of their American colonies.

Americans constructed in the Georgian style for most of the 1700s, and it was not until the 1780s the nearly identical Adam style began to take over.

From the simplest terms, a Georgian-style home has a centered entrance door and two multipaned sash windows on all sides of the entry, occasionally with five aligning windows on a second level. Most but not all of are two stories, and sometimes they are three, along with there being urban townhouse versions.

Anna Berglin Design

It might appear surprising that out of such a rigid formula may come numerous combinations and these lots of detail. The colonial-era Georgian needed a formal design in theory, with architectural details often made by individual carpenters, masons and other skilled artisans. Pattern books of the time supplied guides, resulting in individual interpretations by its builders. Contemporary examples of the design follow first organization and have double-hung divided-light windows, but otherwise they vary considerably in implementation.

Though the home here is considered a Cape Cod, this sort of one-story design was popular in the Southern colonies during Georgian dominance. The negative gabled roof is one variation.

Others could have a hipped roof, a gambrel roof or a centered front-facing gable combined with either a hip or gable roof. Single-level originals normally have dormers, while two-story versions might or might not have them. Additionally, many Southern cases are brick construction; wood-frame construction is more typical in Northern originals.

Bonin Architects & Associates

Even not as common, some Georgians have rock exteriors, like this newer version. See that the entry is classically detailed, with sidelights and a fan light over the paneled entrance doorway, but lacks a protective roof. This is another substantial variation. Some Georgian homes have no entrance porch or cover, some have a very simple drop overhanging the entrance and some have considerably detailed porches.

If the porch extends beyond the entry to enclose different windows or the whole facade, the design is probably from the classical revival style. Chimney positioning varies also but usually increases the stout appearance of this style. Dentils trim the eave line; versions on this detail are often unique to every home.

Martha O’Hara Interiors

Contrast this 20th-century Georgian with all the previous example. A round porch accomplishes this painted brick-veneer home. Even though it’s similar to a dentil, the larger bracket-type detail under the eave soffit is referred to as a modillion. Quoins at the corners, keystones at the primary level windows and Corinthian columns at the entry porch bring about a rich expression. The unusual use of a French door to open onto the balcony of the entry porch farther individualizes this home.

Consider the simplicity of the Georgian plan. The next floor matches exactly atop the initial, along with the organization of rooms extends outside the central entry and inside hall where the staircase are placed. This functional and efficient design has stood the test of time.

Morgante Wilson Architects

Like I said, variations in roof form happen during Georgian-style architecture. A centered gable with a pediment jobs slightly from the front view of the example here.

The gabled entry porch has yet another pediment, while quoins and arched impressions from the brick over the lower-level windows farther express the theme. Notice the prominent modillions. The number and positioning of the second-floor windows is odd.

In smaller Georgian houses, there could be a single window on either side of the entry, in larger homes there could be as many as three on every side. Among three-, five- and seven-rank fenestration, five is undoubtedly the most frequent.

Highgate Builders

Very similar to the former home, this hip-roof model contains a centered forward-facing gable with a prominent pediment. Notice the arched windows with radiating muntins, the strips of timber dividing the glass panes, place from the gabled dormers.

Contemporary interpretations of Palladian windows put off the side sections. Unusual here you’ll discover the segmented arched windows of the primary facade. Originals occasionally had a brick lintel stacked vertically in this exact same form, but this window formation proved to be quite infrequent. There’s also a brick belt line, which is another element found in some, but not all, Georgians.

Witt Construction

In contrast to the previous examples, clapboard siding with prominent pilasters defines this closely comprehensive residence. A Palladian window concentrates attention over the entry, and stout chimneys pierce the middle of the hip roof.

An ironic flexibility exists within the Georgian style: Houses can be quite small, or they are sometimes the most extravagant mansions.

Neumann Lewis Buchanan Architects

Much like the previous example in composition, this clapboard house with a gable roof maintains a simpler appearance from the front. The eye is drawn to the minimally detailed entry, while a marvelous Palladian window rests over.

Neumann Lewis Buchanan Architects

Delight in the inside view of the Palladian window of the pervious example, place logically at the stair landing. Who wouldn’t want to go up and down this path every day?

Highgate Builders

This modern Georgian house exhibits the gambrel roof form, which could also be found in colonial originals. This roof isn’t to be confused with belonging to Dutch colonial design, which preceded Georgian.

DeMotte Architects

Within this 20th-century Georgian, a main, symmetrical front part (or altitude ) is flanked by varying but still arranged sections. The closely connected Adam design replaced Georgian at the turn of the 19th century. Classical revival, the design with big porches with prominent columns, supplanted Adam in the middle of the 1800s.

Early-20th-century tastes revived many previous fashions, including Georgian, although the advent of historic preservation and restoration made an affectionate following.

Roots in classical architecture and a strong and popular background continue to support conventional design through present times. Even in the event that you don’t reside in a traditional-style home, chances are there’s one close by.

Learn about more traditional house designs

See related

“Tiny” doesn’t have to mean “shy” Project Manager Javis Ma of Urban Design & Build maintained this mantra in mind when turning a small Hong Kong residence to a trendy one. The 630-square-foot flat is located within an old tong lau construction in Central Hong Kong; tong lau buildings were originally tenements, usually built from the first to mid-20th century. This building now contains small units designed for both residential and industrial purposes.

Stripping the unit down to its bones, Ma designed a new layout which makes use of the flat’s long and narrow shape. A kitchen with a workspace serves as the heart, and a living area, bedroom and bathroom complete the area. Smart storage options and a couple of visual tricks take advantage from the flat’s limited square footage.

in a Glance
Who lives here: A single expat businessman
Location: Central Hong Kong
Size: 630 square feet; 1 bedroom, 1 bathroom
Cost: Around $45,000

Urban Design & Build Limited

A number of these tong-lau buildings were renovated and turned to rental units throughout the postwar years, which saw an influx of immigrants to Hong Kong. Single rooms were frequently split into sleeping areas with bunk beds, while residents shared the bathrooms and kitchens.

This specific building had an extremely traditional tong-lau layout, with the most amount of square footage utilized and a higher ceiling height compared to many residential flats in Hong Kong.

Urban Design & Build Limited

Ma designed the flat using a multipurpose waist with different spaces at both end. The kitchen is the center of the apartment. The custom worktable may be used for dispensing foods, eating or working.

With restricted access to the outside, the flat had poor air circulation, and one side faces a busy road. A brand new air conditioning and ventilation system today provides clean air.

Bar Condominiums: X2 Beat Stool, Homeless Hong Kong

Urban Design & Build Limited

A built-in closet offers storage without taking up extra room. Chalkboard paint means it could double as a place for writing shopping lists and recipes.

Urban Design & Build Limited

The easy furniture highlights the flat’s industrial and contemporary mix of raw concrete and clean white lines. Splashes of natural feel, neon blues, vivid yellow and burnt green add visual flavor to the otherwise stark space.

Couch: habit; java table: Klubbo, Ikea

Urban Design & Build Limited

Rest and play areas are on both sides of the kitchen. The layout makes for a seamless transition from one action to another.

Constructed upper cabinetry lines one full wall of the flat for plenty of storage. The shortage of hardware helps the units combine into the wall.

Rug: Hampen, Ikea

Urban Design & Build Limited

The kitchen presented some unique challenges. Ma wanted to design an area that looked minimalist but still had all the vital functions for a multipurpose space which could fit in the flat’s limited square footage. Expanding the kitchen countertop marginally into the living room created more prep room and makes the room look bigger.

Urban Design & Build Limited

The lineup of the kitchen counter tops visually extends to the bedroom, separating the customized MDF headboard out of a cork bulletin board.

Table lamp: Lane Crawford Hong Kong

Urban Design & Build Limited

A thin piece of aluminum divides the two substances, while “collapsing” built-in MDF shelving emphasizes the natural, natural feel in the room.

Urban Design & Build Limited

A toilet and shower area in the back of the bedroom will get plenty of natural light from a window in the back of this unit.

Urban Design & Build Limited

Customized stone tilework complements space-efficient storage.

Urban Design & Build Limited

Inspired by stained glass churches, the bedroom sliding door diffuses soft light to the area. Each of the yellow panels slides out separately, creating different light patterns in each area based on the time of day.

See related

An atrium is an internal courtyard rising vertically through a construction using a glass or open roof. Atriums provide natural light and ventilation whilst producing the visual effects of indoor-outdoor living.

Hufft Projects

Atriums are an effective way to save energy by utilizing daylight.

John Maniscalco Architecture

Like a chimney, atriums take in little air but possess a top outlet, making healthy ventilation.

David Eichler Photography

Most Eichler homes include atriums. Indoor-outdoor living was crucial to Eichler’s goal of contemporary design for the masses. In ancient times the atrium was the most lavishly decorated room in the house.

uttara and adwait

Atriums are usually rectangular and have four walls, but the illusion of this can be made with linear specifics along with a large skylight.

Studio Bergtraun AIA

An atrium can have a garden. With experimentation and research, the proprietor can come across the plant species that will flourish in it.

More: Read hundreds of atrium design photographs

See related

ers, you answered our call! Thank you for sharing your creative Halloween entryways with us. I’ve been using a ball checking out all of your decorations, from inviting harvest displays to decoration made to frighten off the most intrepid visitors. Here’s how you all are spicing things up this October.

Lighting plays a major role in a lot of ers’ Halloween entry schemes. Garrison Hullinger has the expertise to make a great Halloween glow and spotlighting for his favourite holiday.

Hullinger also includes some toil and trouble brewing on the front porch, giving the place a layer of fog that is unexplained.

Mary Prince Photography

Photographer Mary Prince submitted this beautiful Halloween driveway; autumnal landscape islands are topped off by pumpkins.

Lynda Quintero-Davids of Focal Point Styling has highlighted the vertical with branches and bright fall foliage.

consumer rgillenwater’s display can readily be de-Halloweened on November 1.

This entry transforms after dark, when consumer safbham flicks on creepy luminous cat eyes and flickering orange lights.

Julie Ranee Photography

Gourds and pumpkins are such a wonderful way to decorate for both Halloween and fall generally. The further disfigured and wartier, the greater.

See the rest of this porch

This picture, sent by consumer cindyp106, is the one that made me laugh the hardest. Apparently, Pumpkinbum is in need of a good belt.

Smalls Landscaping

If you would like to work that Halloween curb appeal beyond the stoop area, use a window box or deep windowsill like Smalls Landscaping includes here.

You might think that this is just a pretty entry decorated for maximum fall curb appeal, but look closely… it seems the house might have landed on the Wicked Witch of the East.

Mary Prince Photography

As striking as pumpkins intricately carved with Van Gogh paintings or lace designs are, I prefer to be fulfilled with old-school jack-o’-lanterns with character like those.

It’s difficult to believe that consumer Deborah Price isn’t done with this entry yet. She promises to reveal the finished design on All Hallows’ Eve. You can follow her progress in her Halloween 2012 ideabook.

Front lawns –turned–graveyards are becoming increasingly more elaborate. This one is from consumer shannon; the next one came in from consumer sunflowerbecky.

consumer Kevin writes,”L-O-V-E Halloween! Here’s what we do with our entry but we do a lot more with the yard. We get almost 600 trick-or-treaters every year. So enjoyable!” Kevin’s pumpkin-head ghouls look more menacing at nighttime (next picture ).

Here’s a close-up of Kevin’s pumpkin-head ghouls at nighttime. Pretty scary things — I am astonished 600 trick-or-treaters brave their way up to the door.

consumer tenthmile writes,”Here is the first year I have really done anything for Halloween, so no laughing.” No laughing ; I am batty over this smart garage door dressing.

Edgar Allan Poe brought out the goth in consumer donnasue65, who used his poem”The Raven” as inspiration for a black, white and red scheme.

consumer ksflygirl makes certain her beautiful fall entryway doesn’t get eaten by local Kansas varmints by shining her up gourds with some lacquer.

Mary Prince Photography

I certainly would not take the apple this witch in Boston’s Back Bay is offering!

Sunflowerbecky didn’t forget a detail on this creepy hanging skeleton bride, complete with a veil and a black rose. “We go all out for Halloween… we are living in a 140-year-old house and we attract the children and parents through the house with each room decorated to be somewhat haunted,” she writes. Does anyone else get the feeling from this it’s not so mild? I would really like to check it out.

consumer Melissa Hedges knows the power of giving people the feeling that there’s something frightful hovering overhead. One look up in this need to produce a terrified gasp.

consumer tomnkat has silhouettes in every window of the house.

“I looked for contours that I liked and sketched them black fadeless bulletin board newspaper,” writes tomnkat.” [I] cut them and taped them up! I really like them and my daughter begins asking me to place them on October 1st — they are a hit in the area!”

consumer sarelle23 makes sure the little ones aren’t scared off by those spooky skeletons and spiderwebs. “We are called the Halloween House in our neighborhood,” she writes. “We replace the white bulb onto the porch with reddish, which really glows supporting the cobweb at nighttime. The skeleton on the right is on a sensor and makes moves and noise when people walk by. We can observe the trick-or-treaters out of our kitchen window — if they’re young, I answer the door and it is less frightening. If they’re older, my spouse places on a monster hands and opens the door, scaring the elderly children — they love it!”

At first glance, consumer flippingartist’s front porch doesn’t seem all that scary, until you observe those creepy eyes peeking out of the”hole” in the steps.

Don’t be intimidated by elaborate decorations; consider just how charming something as simple as consumer ikwewe’s jack-o’-lantern lights can be, day or night.

Please check out the Opinions section of the original Halloween call to see more great decorating ideas. Additionally, please keep sharing your decorations in the Comments section below!

See related

Twist your fireplace mantel to the showstopper it had been intended to be through paint. And consider colors other than typical white. A fresh paint color can dramatize your mantel, turn the heat up on the surround or require off the attention worn brick, stone or tile. The best method to paint your mantel depends on what it’s made of and the present end on it (and just how many layers of paint it’s). Consult your regional paint shop for hints and what things to use. Listed below are 10 beautiful, colorful mantels to inspire your own projects.

Tina Barclay

A reddish mantel looks spectacular surrounded by warm woods. Black iron and oil-rubbed bronze finishes are great-looking beams for it.

Julie Williams Design

Create a relaxing and tranquil contrast using a deep blue-gray fireplace mantel which has a bit of green. Try Benjamin Moore’s Templeton Gray for a coastal, transitional or traditional appearance.

Kathleen Ramsey

A color like Sherwin-Williams’ Otter adds warmth in a large room. Little tiles used in the fireplace create the surround pop, and rooms with vaulted ceilings feel cozier.

Add color and vibrancy into a fireplace by choosing a new earthy-green finish. Use on a chunky mantel and the eye will concentrate not on the surround but on the fun shade around it.

Green Apple Design

Black is striking and dressy. It may turn a modern fireplace to ultramodern. And it can also seem great when used with rustic components like this ledge rock. It pulls the deep undertones in the stone beautifully.

The Yellow Cape Cod

Use a good-quality high-gloss paint. Use different size paintbrushes to get into small, detailed areas in addition to larger mantel places. A narrow mantel in white can appear skimpy, but you can pump up the volume by painting it the exact same color as your own tiles.

Lawrence Architecture, Inc..

Soften a sharp fireplace mantel in Benjamin Moore’s Abingdon Putty. Here it provides nice added contrast to the remainder of the molding in the room.

Synthesis Design Inc..

In case you have a modern mantel, try out a gray or taupe color like Sherwin-Williams’ Truly Taupe. This will keep the mantel place mild and contemporary.

Warmington & North

Create a large focal point. In case your mantel takes up space, it will appear confident and robust painted a dark espresso like Benjamin Moore’s Branchport Brown.

LDa Architecture & Interiors

I really like this thought. Paint the mantel exactly the exact same color as the wall to make a very dramatic appearance.

More:
Make Your Fireplace the Focal Point
DIY Projects: Updating Your Fireplace
Mantel Mania: Sprucing The Space Above Your Fireplace

See related